All of our hydrogen generating water products use a patent pending Solid Poly Electrolytic (SPE) and Proton Exchange Membrane (PEM) technology as well as titanium coated electrolysis to produce pure molecular hydrogen at high concentration per cycle. The results have been backed by years of research and scientific studies. We recommend that you allow water to soak the PEM unit at the inside base of your unit for 5 minutes before powering on for the first time.

All remaining oxygen and other gases are expelled from the top of the bottle. This is so only pure molecular hydrogen becomes infused into your water. You can also run your bottle with the lid on, or off.

We recommend that you clean your bottle or pitcher with a soft brush and light non-abrasive soap in warm water.

If you use a hard water source in your bottle or pitcher you may need to descale the unit regularly. To do this pour 1/4 cup of white vinegar onto the titanium plates (located in the center of the base in each) so that the plate's become fully submerged.  Let the white vinegar sit for 60 minutes, then rinse and wash with clean water.
Do this once per month for optimal results.

Do not submerge the base of your bottle or pitcher underwater. Do not run the base through the dishwasher, or clean it with a harsh wire brush. Doing so may cause damage to the unit and void your warranty.

Yes you can! Thanks to a new technology with patent pending titanium coated Solid Polymer Electrolysis SPE plates & our Proton Exchange Membrane PEM technology inside of every one of our hydrogen products, you will not  be limited to certain water types.

We recommend using ice water, cold or room temperature water.

Do not pour boiling hot water into the bottle or pitcher, as it may cause damage to the SPE and PEM units inside the base of the bottle and pitcher.

Our 14 ounce bottle will be able to generate pure hydrogen water up to 15 times under one full charge, and the bottle is capable of recharging in 4-5 hours. There is an LED light indicator that will blink red when your bottle is needing to be recharged, while charging the bottle will glow red and turn solid blue when charging is complete.

Our testing have shown 30 minutes to about 1 hour, or longer when the water was kept in a sealed airtight container. Also whenever you're ready to drink more hydrogen infused water, all you have to do is just press the power button and the bottle will run for 3 minutes and generate more hydrogen, remembering to remove the lid in between cycles to relieve any gas pressure that has built up.

Our hydrogen generating water pitcher has two settings, a standard hydrogen cycle that will run for 10 minutes, or a high hydrogen cycle that will run for 15 minutes generating more hydrogen parts per million up-to 1.3 ppm.

No there are no filters or parts to replace. That is one of the huge benefits to owning a IonBottle compared to single use bottle of hydrogen water. Our bottles are reusable, rechargable, and will create hydrogen-rich negative ion water for many years when maintained properly.

According to the scientific research and studies conducted, the patients & athletes that consumed 5 - 7 bottles per day or about 64 to 90 ounces of hydrogen infused water saw the most optimal results of reduced inflammation and increased antioxidants, as well as more energy.

No, in most cases the responses from our customers is their water tastes better after being ionized through their ion bottle or pitcher. This is entirely subjective and can differ depending on the water source used.